This wet cleaning process is easy, because I use ready-to-go tools (sensor swab + fluid) from Visible Dust. It is certainly not a cheap product, given the $3 cost of each swab, but it does a good job of keeping your DSLR sensor clean when compared to other solutions out there. Either way, the below process is much cheaper than sending your camera for $50 or more every time you need the sensor cleaned. As a photographer, you should learn how to do this yourself.
In the video, I mention that you should only use a swab once. You can also use the other side of the swab, but you might end up putting the dust back on the sensor if you don’t keep the swab properly angled. I find that it is best to use swabs once, but you might get better results. When inserting the swab, tilt it horizontally first, so that you do not touch the top and bottom parts of the chamber. Don’t forget to do the same when removing it. You might find some dust specs on the side of the sensor, where you picked up the swab. If those specs do not disturb you, just leave them there. If they do, then you have two choices – either to use corner swabs or a sensor brush to pick up those remaining dust specs. I personally do not worry about them unless the dust particles are huge.
I know that some people will try to reuse the swabs, but I highly recommend NOT to do it. Do not try to wash and dry the swabs either – this particular product is designed for one time use only. Trying to wash and reuse the product might introduce other nasty stuff besides dust on your sensor. You have been warned!
0 comments: